We have all necessary permits to operate, and have an up-to-date record of inspections, including: Naval Sea Systems command authorization to conduct Gauge comparison work, conduct Oxygen and air component cleaning in accordance with MIL Std 1330 and 1622 respectively.

Agencies regulate our business with annual inspections and random visits to ensure compliance.

Products and services include, but are not limited to:

Pressure Vessels, Flasks and Receivers
     PVHO Chamber Modifications / Installations

• HYDROSTATIC TESTING and RECERTIFICATION (Shop & Field)
• CERTIFIED WELDING REPAIRS and NDT INSPECTIONS
• SANDBLAST and/or TUMBLING FOR INTERNAL & EXTERNAL CLEANING
• MIL-SPEC PAINTING OF FLASKS (Internal & External) -

Pressure Component Division Air/Gas Pressure Vessels, Systems & Components

• Existing Air Systems & Compressors
• New Air Systems
• Low & Medium Pressure Receivers
• High Pressure Flasks
• High Pressure Cylinders
• Moisture Separators/Filter Housings
• MK-6, MK-7, MK-8 Life Raft Cylinders
• Chlorine M/P Cylinders
• Valves
• Procure & Fabricate Hoses and Fittings
• Gauges
• Regulators
• Helicopter Emergency Egress Device
• Haskel Pump Rebuilds
• Shipboard 02/N2 Plants
• Recompression Chambers
• Class 100,000 Clean Room
• Sand Blasting and Painting
• Planned Maintenance System
• Divers Training Tank

Piping Fabrication, Testing and Cleaning

• MIL-SPEC HIGH and LOW PRESSURE WELDING and SILVER BRAZING IN PLACE HYDROTESTING OF SYSTEMS
• MIL SPEC BREATHING AIR SYSTEM CLEANING and MODIFICATIONS
• BREATHING AIR SAMPLES TAKEN FOR ANALYSIS and CERTIFICATION
• LEVEL II SYSTEM PIPING DRAWINGS
• MILITARY and INDUSTRIAL PROCUREMENTS, REPAIRS, TESTING, & CLEANING
• SAFETY VALVES: TESTING/CLEANING
• HP/LP Hoses: FABRICATION/TESTING/CLEANING
• GAUGES (Industrial & Precision): Calibration Oxygen Cleaning
• FILTERS: TESTING/CLEANING
• PIPE & TUBE: FABRICATION/ TESTING/CLEANING

Existing Air Systems:

High and low pressure and components inspection certified repairs, certified testing, metal preservation and air output tested and re-certified to applicable Civilian and/or Military standards and specifications:
Recertification of diving life support systems including: MK III, FADS III (mixed gas), TRCS, Diving Module, Roper Carts.

- Pressure air/gas receivers - all sizes and types
- Piping/hoses/fittings
- Related flow valves/relief valves/drain valves
- Gauges/regulators
- Encapsulations (frames and mounting)

Diver air / life support and ship's service / commercial air compressors most frequently serviced at the MSCD facilities are:
    Mako, Quincy, Rix, Bauer and Ingersoll-Rand

We currently have factory trained and certified technicians available to service all makes and brands of compressors and associated air systems.

Back to Top

New Air Systems:

High and low pressure systems and/or components designed, remanufactured and certified to applicable Civilian and/or NavSea/NavFac/SubPac Specifications and requirements:

- Design and manufacture
- NDT inspection as required
- Hydrostatic test
- Cleaning (air or 02) to Mil Std 1330 or 1622 and CGA 4.1 Standards
- Level II drawings supplied
- Operational and emergency procedure instructions

Valves

All units are repaired and serviced to applicable Civilian and /or Military Standards Specifications:
- Cleaned to Military Standards, Air or Oxygen
- Repaired or overhauled if necessary
- Tested to Military Standards
- Software kits cleaned, installed and tested
- Test and Set Relief valves
- Cert's supplied as required

Back to Top

Low & Medium Pressure Receivers:

All types and various size receivers tested and recertified to applicable civilian and/or military specifications either on-board ship or at our facility.
- Preliminary clean-up
- Visual Inspection
- Repairs completed if needed
- Hydrostatic tested
- Abrasive blast and marine grade paint system

Receivers (usually air) serviced by MSCD come from all types of systems including, but not limited to, diving/life support, PVHO's, ship's service air and commercial shop air.

Back to Top

High Pressure Flasks:

All size flasks are tested and re-certified to applicable Military and/or Civilian Standards either on-board (in-place) or at our facility. MSCD high pressure flask service process includes, but is not limited to:

- Ultrasonic testing
- End plugs removed & reinstalled per torque values
- Manufacture of new end plugs if required
- Visual inspection
- NDT if required by findings
- Repairs effected if required and authorized
- Hydrostatically tested
- Abrasive blasted and prescribed coating applied
- Welding of end plugs if required and specified

Back to Top

High Pressure Cylinders and Accessories:

All types and pressure ratings inspected, tested and recertified including, but not limited to:
Diving (SCUBA/Bail-outs - steel or aluminum), Scott Air Paks (SCBA's - steel, alum. or composite), Gases (N2, 02, Med. 02, Helium, Argon, etc.), All DOT Gas Cylinders, Sphere cylinders, Acetylene, Propane, Fire Extinguishers, Foreign cylinders (LAR V, Secumar, Bar-type)

Back to Top

Moisture Separators / Filter Housings:

Recertified to applicable Military Standards and Specification either on-board (in-place) or at the MSCD facility:

- Plugs/caps removed & reinstalled per torque values
- Manufacture of new plugs/caps if necessary
- Visual inspection/repairs/hydro test re-cert
- Preservation coatings applied per specifications

Back to Top

MSCD is approved by NavSea as an authorized recertification facility for .455 cu. ft. and all other life-raft inflation cylinders. Our services include but are not limited to:

- Removal of existing valves
- Visual inspection and condition evaluation
- Hydrostatic testing
- Rebuild or replace valves as necessary
- Cylinder neck thread inspection & evaluation
- Port torque adapter to cylinders
- Torque valves to port adapter
- Paint cylinder necks
- Charge each cylinder to applicable weight (certified air)
- Establish and attach weight information tag

Back to Top

Chlorine M/P Cylinders :

PENWALT- WALLACE & TIERNAN DIVISION
CHLORINE EVAPORATOR SYSTEM CYLINDERS

MSCD five year inspection and certification service including, but not limited to:

- Open and internal/external visual inspection
- Weight test
- Hydrostatic test
- Abrasive blast and coating application
- Re-assemble, seal, storage-pressurize
- Certification and documentation provided

MSCD has an approved process procedure covering the servicing of these cylinders.

Back to Top

Valves:

MSCD provides and/or services of all types of valves currently in use on military and civilian equipment, whether life-support or commercial applications. Those include but are not limited to: Relief valves, Stop valves, Needle valves,Check valves, CPV, Wog and others

All units are repaired and serviced to applicable Civilian and /or Military Standards Specifications:

- Cleaned to Military Standards, Air or Oxygen
- Repaired or overhauled if necessary
- Tested to Military Standards
- Software kits cleaned, installed and tested
- Set
- Certification supplied as required

Back to Top

Procure and Fabricate Hoses and Fittings:

Hoses and fittings are serviced and tested in accordance with applicable Civilian and/or Military Standards and Specifications. They are for high, medium and low pressure applications and include but are not limited to:

- Stainless steel braid / Synflex / Charging whips/ Hydraulic, etc.
- Proof tested to Military Standards
- Hydrostatic testing
- Cleaning to Military Standards for Air or Oxygen
- Fittings inspected, tested and cleaned
- Fittings & hoses O2 cleaned if applicable

All components services to applicable Standards and Specs.

Back to Top

Gauges:

All types and makes of gauges including:
All types and pressure ratings inspected, serviced, tested and recertified including, but not limited to: Depth, Altitude, Pressure, Oxygen, Hydraulic

Serviced to applicable Civilian and/ or Military Standards and Specifications either in-place, or at MSCD facility:
- Cleaned to Oxygen or Air Standards
- Calibrated up to and including 10,000 psi
- If removed, leak checked upon installation
- Certification and documentation supplied

Back to Top

Regulators:

Full service on all types of regulators, some of these types are:
Tescom, Marotta, Grove, Victor, Hoke, Rego, Circle Seal and all SCUBA types

All units repaired and serviced to applicable Civilian and/or Military Standards and Specifications:
- Preventive maintenance
- Complete overhauled if required
- Applicable pressure ranges verified & documented
- Integral gauges serviced and calibrated
- Cleaned to applicable Civilian or Military Standards
- Tested and certified to applicable Standards

Back to Top

Helicopter Emergency Egress Devices: [ HEEDS ]

Manifolds designed and manufactured to customer Specs:

- Cleaned to applicable Military Standards
- Tested and certified to applicable Military Standards

Back to Top

Haskel Pumps/GTS:

Serviced to applicable Standards and Specifications:
- Units dissembled and inspected
- Standard preventative maintenance
- Repair to applicable standard
- Recertified to applicable standards
- Modification

Back to Top

Shipboard O2/N2 Plants:

Onboard plants inspected, serviced, repaired and tested (all phases):

- Pressure tested for leakage
- Repairs effected if indicated and / or specified
- Hydrostatically tested (all or portions)
- Cleaned as required
- Valves/gauges/lines/piping serviced
- Restored on-line IAW Military Standards & Specs

Back to Top

Recompression Chambers (PVHO):

MSCD offers full service on all PVHO systems, including recompression chambers (single or double-lock) and closed-bell diving systems:

- Inspection and condition evaluation
- Repairs and/or modifications if required
- Viewports inspected or replaced (with approved material)
- Door/hatch seals replaced with new if required
- Piping inspected and repaired and/or modified
- All valves (feed, check, relief, etc.) tested & serviced
- Panel gauges/indicators tested and calibrated
- Shells abrasive blasted and preserved (int. and ext.)
- Entire unit pressure tested to specs and recertified

All PVHO units are serviced, repaired, tested and certified for field use in accordance with applicable ASME/PVHO, NavSea, UCSG and Federal/State OSHA Standards and Specifications.

Back to Top

In-House Class 100,000 Clean Room:

MSCD's clean room was constructed, and is maintained, in accordance with Federal Standard-209-B, providing:

- Cleaning to MIL-1622
- Cleaning to MIL-STD-1330
- Navy oxygen cleaner (NOC)
- Cleaning to NavSea 513-SK5746677
- Cleaning to NavSea S6560-AB-MMD-010
- IAW all other applicable Standards

Back to Top

Abrasive- Sand-, Bead- Blasting and Painting:

Our abrasive blasting and painting facilities meets or exceeds all requirements and directives by the EPA of the state of California and APCD San Diego.

- Abrasive blasting conforming to S9086-STNM-010 CH 551 NSTM
- Paint specifications meet requirements of Steel Structures Painting Council

Back to Top

Planned Maintenance Systems [ PMS ]:

50% of our employees are retired from the Navy or have served in the navy. When called upon to perform PMS, we insure that we are using the latest SFR, MIP and MRC cards.

Back to Top

Divers Training Tank:

- 20 foot ( 6.096 meters) length container
- Container has a standard roll-up door on one end and a walk-in-door at the the other end.
- 10 ft. long (3.05 meters) x 8 ft. (2.44 meters) deep tank spanning the 8 ft. width (3.05 meters) of the container reinforced with 10 I-beams to ensure adequate strength.
- Tank is manufactured with 1/4 plate steel (6.35mm) reinforced with channel iron for every 2 sq. ft. of plate metal.
- 4 ft. (1.22m) x 6ft. (1.83m) plexiglas window.
- Storage area can accommodate an entire Mk-III system.
- Onboard filtration system with 1.5 horsepower pool style pump @ 115v with filter assembly.
- Hose saddles umbilical and drain hose.
- External roof access ladder mounted next to access door.
- Exterior is painted Olive Drab. It is painted with 1 coat of base primer and 2 coats of final color.

This entire container can easily be moved using any standard truck or trailer designed for transporting shipping containers.
 
- Overall approx. weight: Dry: 10,000 lbs. (4,535.9K) With Water: 50.000 lbs.  (22,680 K)
Precise weights can be furnished upon completion of tank. 
MSRP     $77,999.99

Back to Top

Products & Services   |  Breaching Gear   |  S.O.C.A.  |  About Us   |  Partners   |  Contact  |  Homepage